Archive for November, 2011

Solar and Orlock Rivets Are Saving The Planet

Wednesday, November 16th, 2011

Solar farms are usually assembled in vary large flat outside areas. Solar is becoming more widely adopted too. Solar farms are assembled right on site. To set up a solar farm, a cement slab is laid and the brackets are put together right on location. The problem is that, traditionally, they have been assembled with nuts and bolts. Why? Because the concern of rivets pulling through the material is of major concern. The problem with a nut and bolt are many. For example, nuts and bolts require two pieces(naturally). Bolts and nuts are heavy and require tons of manual labor and time to install. Many world-class solar installation companies are discovering the “Orlock Rivet” fastening solution. Orlock, first and foremost, has a back-side flange that allows it to grip and hold the mating material together, without the threat of pulling through the material. Orlock is also amazingly easy and quick to install. Orlock is of coarse is a one piece blind fastener, so inventories are light and requires less total pieces of material. All of these reasons can help make Solar a more useful energy alternative for our planet. Orlock is helping to protect our planet… One rivet at a time.

Share: